MeshCore in Scotland/Places/Central Scotland/Greenock

MeshCore in Greenock

Steep ground straight up from the water. A radio on the hill behind Greenock can hear most of the lower Clyde and across to Argyll.

9Nodes within 25 km
6Repeaters
2Companions
1Rooms

Greenock right now: nodes heard in the last 5 days within 25 km, every one of them reaching the wider Scottish mesh. Updated 12:59 UTC.

Get on the mesh in Greenock

Four steps, about an evening, roughly £25 of hardware.

  1. Step 1

    Get a radio

    Any supported LoRa board for the UK 868 MHz band. Heltec and RAK boards are what most people here run.

  2. Step 2

    Flash the firmware

    Fresh firmware from meshcore.io for your exact board. Never keep what came pre-installed.

  3. Step 3

    Set scope and path

    Pair over Bluetooth, then set the radio preset, sco scope and 3-byte path hash.

  4. Step 4

    Say hello

    Open #scotland, check its scope is sco, and post. Someone will almost always answer.

Repeaters around Greenock

The fixed radios doing the relaying, nearest first. Distances are from the centre of Greenock.

RepeaterDistanceLast heard
Helensburgh Repeater9 km34 min ago
Milton15 km19 h ago
MUIRSHIEL-TT118 km2 min ago
Elderslie Repeater v221 km1 h ago
OK Hills22 km1 h ago
Gleniffer Repeater23 km35 min ago

Joining from Greenock

Radio presetUK / EU Narrow
Frequency869.618 MHz
Default scopesco
Local region codenone yet

There is no local region code for this area yet. Repeaters here run sco alone, which works.

Where another repeater would help

6 repeaters are already up around Greenock, so the ground worth covering now is the edge rather than the middle: the villages and glens where the town's repeaters stop being heard. The coverage map shows where that line falls.

Questions about Greenock

Is there a mesh network in Greenock?

Yes. 6 repeaters and 9 nodes were heard around Greenock in the last five days, and everything heard there reaches the rest of the Scottish mesh.

How do I join the MeshCore mesh in Greenock?

Any LoRa board for the UK 868 MHz band, fresh firmware from meshcore.io, the UK / EU Narrow radio preset and the sco scope. About an evening's work and roughly £25 of hardware.

What region code do repeaters in Greenock use?

There is no local region code for this area yet. Repeaters here run sco alone, which works. sco is the scope every Scottish radio sets; the local code only adds where traffic should stay.

Where is the nearest MeshCore repeater to Greenock?

Helensburgh Repeater, 9 km from the centre of Greenock. The page lists every repeater heard within 25 km, nearest first.

Nearby

The next places along the mesh.